153 items under $10,000 for sale
Most Recent
Most Recent
Keyword
Price
Featured ads
All Results
3
Sydney Composites front splitter, used at WTAC in 2023 would suit either open class or Pro-Am, 2200mm wide and 810mm wide but can be reduced if required. Proven to produce massive down force with low drag. Titanium Wear Plates. Only selling due to changing direction. Happy to answer questions 0427700423 and can freight Austria wide
16
RegisteredLog Book
A very quick car that goes really really well, and sounds glorious - the 3.0i Busso V6 is known to be one of the all time great engines. If I was keeping it I would put a set of 17" teledials on it. ( I have a set of 16" teledials, so they will go with the car, just needs spacers (supplied) to clear the Brembos - Only selling as I have a race project on the go (yes, it's an Alfa......) But that's what ALFA stands for isn't it ? Always Looking For Another....... I have three at the moment, so I
97 1
Roll Cage
This left-hand-drive, GM Australia-built Holden Monaro is a real head-turner and the perfect car for the collector, professional racer or track day enthusiast – or the same person all wrapped up into one! The Monaro was assembled by GM Holden at Elizabeth in South Australia and is believed to be one of only a handful of left-hand-drive examples in the country. The odometer reads 31,739kms of which the vast majority (~31,000kms) were driven by Holden engineers at the Lang Lang proving ground in
2
Near New M800 and Data Logger Dash has not been used I owned as a spare for my FD RX7 Racecar. features enabled are as follows: M800 SN1323 single lambda, Hi/lo injection, Cam control, Advance functions (Traction control, Launch Control, Gear Ign cut, Overun boost) Dash ADL Dash SN 2732 shift / warning lights 1mb logging, Pro logging, standard inputs, See attached screen shot
2
This is one of the diffs out of my VL commodore race car. It's got a pair of custom brackets to suit VS front calipers and the shock mounts have been cut off as well aa the car that it was in ran a rose jointed panhard bar with adjustable roll centre sonif you were going to use this housing it will require a bit of fab for your application. It's an M75/78 with 3.89 gears an a full 31 spline spool. Im great condition.
6
NO INTERNALS - This is a set of 3.2 engine cases with cylinders, heads and cam towers. What is shown in the photos. - 930/21 engine case, aluminium 5R and 6R with stamped matching case halves. - 930.104.325.4R Cylinder heads - 930.105.111. 2R Cam towers Note: Ex race car engine which is blank where the engine number would be. Would suit race build or would have to be re-birthed to use on the road. Also have internals if interested.
3
I have 19 available $40 each which is less the half price can post Australia wide
2
Porsche 996 997 Centre lock wheel travel nuts Can post Australia wide for $20
8
Roll CageLog Book
Astra CDTi production car, Holden factory race car built by PMM for the 2007 Bathurst 12 hour sponsored by Bendon, built to showcase the power of the new diesel Astra. Also competed in the 2009 12 hour for the Holdsworth family, did some production racing for a few years after but more recently just used as a fun track car. Very well built, 6 speed, DMS suspension, Racetech seat, Performance Box with power and external antenna, we use ex Toyota 86 semi slicks for very cheap fun. Would need harne
8
Sr20de fully rebuilt. Custom made pistons for 14:1 compression, h beam rods, big crow cams, golbys adjustable cam gears, gtir intake manifold. Block was cleaned, decked and machined. Crank shaft was machined and balanced. Light weigh under drive harmonic balancer. Head was cleaned tested machined and ported. Comes with brand new clutch kit with a light flywheel. Engine is ready to bolt in and run.
8
2012 tandem race car trailer Beaver tail Hidden pull out ramps Electric winch Will come with a new battery Breakaway system Deck is 14ft Total length of trailer and draw bar is 20ft Inside the guards are 1,900mm The total width of the trailer is 8ft Registration until November
10
Registered
2001 gen7 zzt231 celica 6 speed, Trd , rotrex supercharger,front mount intercooler etc. Has engineering cert in tasmania. Looking for a new project ?( i have another project taking my time and energy for now)This car has a blown motor after throwing a rod.Needs new block, 1 x mahl piston and rod,machining.The head/valves and crank seem ok.The motor/ supercharger had 50k on it after complete rebuild.(motor was over revved )after clutch problem. As far as power it was running 275kw atw @ 7psi o
5
This car trailer is in near-new condition. Built in October 2021. Used to carry race car. 4.83m long and 2.0m wide at the tray. Wider and longer than usual. Has been stored inside my warehouse when not in use, never outdoors. Has extra shackle loops, manual winch and long ramps. Licensed and ready to use.
3
This is a 1970's flat track bike with an OSSA Stilleto TT engine (also refereed to as a Dick Mann TT engine), these motors were produced for American Junior Class Flat Track with around 36 hp, I have had this bike for many years, unfortunately at 70 something I am not brave enought to race this rocket. I was told by the person who sold me the bike that the frame was a copy of an Alstar, but I cannot confirm this. Some years ago I removed the front brake and changed the rear manual disc caliper w
6
ADL2 Motec Dash Good Working Condition Supplied with new harness and connector as supplied by Motec QLD Also supplied with pinout sheet Brisbane
6
All steel enclosed car trailer. Built to fit Austin Healy Sprite. Car space is 1320h x 1550w x 4000mm long. Gas struts on rear door. 200AH AGM battery installed 10/6/21. New tyres fitted in 2022. Serviced with new wheel bearings about 1000km ago. Inside and outside led lights. Internal gazebo rack. 4000kg winch.
9
Roll Cage
Excel track / hill climb car agi cage xyz suspension cobra seat turn key ready to go NEG on price
6
Single axle car trailer, well constructed and in excellent condition. Near new light truck tyres, hydraulic disc brakes, electric winch & new jockey wheel. 2.5m aluminium loading ramps, 2 lock n load straps and plenty of tie- down points. Can transport a vehicle up to 950kg, Internal dimensions- 3.27m long & 1.75m wide. Perfect for Hyundai Excell, MX-5, Mini, Datsun 1200, MG, formula VEE, etc, etc. 2 months Qld rego. Barely used in last 18 months, always kept undercover, best towing car trailer
11
RegisteredRoll Cage
For sale is my 2004 Clio RS172 MK2- with ESP for $6500 or without the $5500 negotiable I have decided to sell my little pocket rocket as it is not getting use as much anymore. Great handling and fun car to drive. It was my daily for about a year and I took it to Sandown once for a track day. My intention was convert it in a track car but ended up getting a dedicated track car so here it is for sale now with a great package for someone looking for a track ready car. Currently sitting at 188356
19
MUST GO This BMW 118i has been set up as a track car and is great for a novice wanting to try. Recently spent over $3k on servicing costs getting it ready - see photos. Car is fitted with a new OMP 5 point race harness and has Vmax front rotors and high performance brake pads. Road legal Yokohama Advan A009 semi slicks have been fitted and have plenty of tread remaining - see photo. A full size spare wheel will come with the car. Rear seats have been removed but they will come with the car.